Products category
contact us
Email:
sales@anfiber.com
Tel:
+86-755-61373556
Fax:
+86-755-61373550
Website:
http://www.anfiber.com
Products
Your are here: Home > Products > Hybrid Device

Single Mode Tap Isolator 1310/1480/1550nm 500mW

Name: Single Mode Tap Isolator 1310/1480/1550nm 500mW
Class: Hybrid Device
Type: Tap Isolator

Specifications:
Parameters Unit Values
Stage   Single Stage Dual Stage
Center Wavelength nm 1310, 1480 or 1550
Operating Wavelength Range nm ±20
Max. Excess Loss dB 0.7 0.8
Tap Ratio (Input to Tap) % 0.5 , 1 , 2 , 5 , 10 or Specify
Typ. Peak Isolation dB 40 55
Min. Isolation at 23 dB 28 45
Min. Return Loss (Input/Output) dB 55/55
Max. PDL (Port 1 to Port 3) dB 0.1 0.15
Max. PDL (Port 1 to Port 2) dB 0.1 / 0.25(for Tap Ratio5%) 0.15 / 0.3(for Tap Ratio 5%)
Max. PMD (Port 1 to Port 3) ps 0.25 0.1
Min Directivity (Port 3 to Port 2) dB 55
Max. Optical Power (CW) mW 500
Max. Tensile Load N 5
Fiber Type   SMF-28e Fiber
Operating Temperature -5 to +70
Storage Temperature -40 to +85

Ordering Information:
A B C D E F G
Wavelength Stage Coupling Ratio PMD Connector Type on Port 1, 2 Fiber Jacket on Port 1, 2 Fiber Length
31 = 1310nm
48 = 1480nm
55 = 1550nm
X = other
S = Single Stage
D = Dual Stage
01 = 1/99
02 = 2/98
05 = 5/95
10 = 10/90
X = other
 1 = 0.1ps Max.
2 = Refer to above Spec.
1 = FC/UPC
2 = FC/APC
3 = SC/UPC
4 = SC/APC
N=None
X=other
B = 250um Bare Fiber
L = 900um Loose Tube
X=other
1 = 1.0m
X=other

Single Mode Tap Isolator 1310/1480/1550nm 500mW
Related Products