Parameters | Unit | ANFIBER-FSW-1×N PM Fiber Optic Switches | |||
Insertion Loss | dB | 1 < N ≤ 45 | 45 < N ≤ 88 | 88 < N ≤ 128 | |
Typ: 0.6 Max: 1.2 | Typ: 1.2 Max: 1.5 | Typ: 1.5 Max: 1.8 | |||
Wavelength Range | nm | 850±40 / 1300±40 | 1260 ~ 1650 | ||
Test Wavelength | nm | 850 / 1300 | 1310 / 1550 | ||
Back Reflection loss (Return Loss) | dB | PM ≥ 55 SM ≥ 55 MM ≥ 35 | |||
Crosstalk | dB | ≥ 50 | |||
ER (Extinction Ratio) | dB | ≥ 18 | |||
WDL (Wavelength Dependent Loss) | dB | ≤ 0.25 | |||
TDL (Temperature Dependent Loss) | dB | ≤ 0.30 | |||
Repeatability | dB | ≤ ±0.05 | |||
Durability | Cycles | ≥ 10 Million | |||
Switching Time | ms | ≤ 10 (Sequence switch time of adjacent channel) | |||
Optical Power | mW | ≤500 | |||
Fiber Type |
Polarization Maintaining Panda Fibers Single-Mode Fibers 9/125 Multi-Mode Fibers 50/125 Multi-Mode Fibers 62.5/125 etc |
||||
Operating Temperature | ℃ | -40 ~ +70 | |||
Storage Temperature | ℃ | -40 ~ +85 | |||
Relative Humidity | % | 5 ~ 95 | |||
Dimension | mm | 135×40×32 (N≤4) | 135×64×32 (N≤12) | 184×78×36 (N≤16) | |
184×78×66 (N≤45) | 184×156×66 (N≤88) | 184×220×66 (N≤128) | |||
140×77.5×32 (N≤16) | 140×77.5×64 (N≤32) |
N | A | B | C | D | E |
Channel | Fiber Type | Test Wavelength | Tube Type | Fiber Length | Connector |
1 ~ 128 |
PM=PM Fiber SM:=SM, 9/125 M5=MM, 50/125 M6=MM, 62.5/125 X=Ohers |
850=850nm 1310=1310nm 1550=1550nm 1310/1550=1310/1550nm X=Others |
90=900um 20=2.0mm 30=3.0mm X=Others |
05=0.5m±5cm 10=1.0m±5cm 15=1.5m±5cm X=Others |
OO=None FP=FC/PC FA=FC/APC SP=SC/PC SA=SC/APC STP=ST/PC STA=ST/APC LP=LC/PC LA=LC/APC X=Others |