SLED optical light source-1000/1180/1260nm

SLED optical light source

1000/1180/1260nm

Applications:

Optical fiber sensing

Optical fiber passive component spectrum testing

Optical fiber grating, DWDM, filter testing

Optical fiber measurement equipments

Features:

Slected wavelength

High stability

Broadband light source

Specifications:

 

Parameters	1000 SLED
Radiation source	SLED
Central wavelength (nm)	1000±10
-3dB spectrum width (nm)	≥100
Output power (mW)	≥4
Spectrum density stability1	≤±0.05dB/15 min
Short term stability 1	≤±0.01dB/15 min
Long term stability 2	≤±0.03dB/8 hour
Operating mode	CW, internal modulate, external modulate
Fiber pigtail	Single mode 1060 Fiber
Output connector	FC/PC, FC/UPC or FC/APC
Operating temperature	0℃ ~ 40℃
Storage temperature	-20℃ ~ 70℃
Power supply	AC110/220V±10%, 50Hz, 20W
Dimensions (L×W×H)	90×70×19 or 320×220×90

Remark：Stability is tested at room temperature 25±2℃ after pre-heating 30 minutes.

               1.  Test condition: fixed temperature, CW.

               2.  Test condition: temperature variation ±2℃, CW.

Typical Spectrum:

Ordering information:

 

OS	Type Of Laser Diode	Type	Operating Wavelength	Power	Connector
	D=DFB-LD  L=LED F=FP P=Pump S=SLED M-Multi-mode	M=Module D=Desk-top	131=1310nm  155=1550nm  1315=1310 & 1550nm  etc	00=0dBm    10=10dBm      20=20dBm	FC/UPC     FC/APC

• Last product: 840_880nm_SLED_Light_Sources
• Next product: 1050nm_SLED_Broadband_Source