MEMS 1X8 1X10 Optical Switches

MEMS 1x8 1X10 Optical Switches

Fiberer’s MEMS 1x8 1X10 Optical Switches is based on MEMS technology . The component makes an opticalconnection between an optical port and either one of 16 input or output line. The highly reliable switching mechanism use integrated micromirrors and feautre below 1ms switching time and only 1.5 dB insertion loss. The switch is powered by a 5V supply voltage. A 5 V TTL or CMOS drive signal is used to control the swithcing state

Applications:

Optical Reconfiguration

Instrumentation

Provisioning

Features:

Low insertion loss

High Crosstalk

Fast response time

Mini Size

MEMS 1X8 Optical Switches Specifications:

 

Parameter	Single mode	Multimode
Wavelength range (nm)	1240~1640	700~1700
Insertion loss (dB)	≤2.0 (Typ 1.2)	≤2.0 (Typ 1.5)
Polarization dependent loss   (dB)	≤0.12	≤0.20
Return Loss (dB)	≥ 44   (Typ 55)	≥ 35   (Typ 45)
Cross talk    (dB)	≥ 60   (Typ 75)	≥ 45   (Typ 55)
Switch speed (ms)	≤1, (Typ 0.5)	≤20, (Typ 2)
Durability (cycles)	no wear out	no wear out
Fiber type	SMF-28e	50/125, 62.5/125 MM
Operating Voltage (V)	<5	<5
Power Consumption (mW)	Typ 40	Typ 40
Operation temperature(℃)	0~70 C	0~70 C
Storage temperature (℃)	-40~85	-40~85
Package Size (L x W x H) (mm)	76 x 93 x 9.5	76 x 93 x 9.5

 

MEMS 1X8 Optical Switches Dimensions Drawing (mm):

MEMS 1X8 Optical Switches Ordering Information:

 

MSW	Port Type	Wavelength	Mode	Pigtail Type	Fiber Type	Length	Connector
	1x8 1x10	1240~1640 700~1700	N=Non-Latching	900=900um loose tube	1=SMF-28e 2=50/125 3=62.5/125	1=1.0m	NE=None FA=FC/APC FC=FC/PC SA=SC/APC SC=SC/PC ST=ST/PC LC=LC/UPC XX: Specify

• Last product: MEMS_1X12_1X13_Optical_Switches
• Next product: MEMS_1X4_1X6_Optical_Switches