ASE L-Band light Sources

ASE L Band Light Source

Applications:

Optical fiber sensing

Optical fiber passive component spectrum testing

Optical fiber grating, DWDM, filter testing

Optical fiber measurement equipments

Features:

High output power

High stability

Broadband spectrum output, covering L band

Specifications:

 

Parameters	ASE-L
GFF	No	GFF
Operating wavelength (nm)	1565～1610	1568~1600
Flatness (dB)	-	<3
Output power (dBm)	10.0 ～15.0	7.0~12.0
Spectral density (dBm/nm)	-20 ～ -2
Spectral stability (dBm/nm)	≤±0.005(5 min)
Output power short-term stability (dB)	≤±0.01 (5 min)
Output power long-term stability (dB)	≤±0.03 (8 hour)
Pigtail fiber	SMF-28
Connector type	FC/PC, FC/UPC or FC/APC
Operating temperature (℃)	0 ～ +65 (-20 ～ +65 available)
Storage temperature (℃)	-20 ～+70
Relative humidity (%)	20～80
Power Supply	110/220V AC, +5V or +3.3V DC; >500mA; △V＜1%
Maximal Power Consumption	10W
Dimensions (L×W×H mm)	90×70×19(Module); 320×220×90(Desk-top)

Remark: Stability is tested at room temperature 25±2℃ after pre-heating 30 minutes.

1. Test condition: fixed temperature, CW.

Typical Spectrum:

Installation of Module:

Ordering information:

 

ASE-L	Package Type	Output Power	GFF	Connector
	M=Module D=Desk-top	10=10dBm 13=13dBm etc	N=Without GFF G=With GFF	FC/UPC FC/APC etc

• Last product: ASE_C-Band_light_Source
• Next product: ASE_C+L-Band_light_Source